Heat Resistant Industrial Ceramic Pieces Zirconia Ceramic Bushing /
Key words : Industrial Ceramic Pieces Zirconia Ceramic Bushing
Key Specifications/Special Features:
Advanced Technical Zirconium Oxide Ceramic Bushings Sleeves Rings
1.Material: ZrO2 Ceramic, Zirconia Ceramic, Zirconium Oxide
*High strength and fracture toughness
*High hardness and wear resistance
*Low thermal conductivity (20% that of Alumina)
*Good chemical resistance
Zirconia is most famous high-performance material among all oxide ceramics.
Ceramic components made out of Zirconia generally consist of
Zirconia as basic material doped with some percentage of other
oxides like Yttria (Y2O3) or Magnesia (MgO). Depending on doping material different material properties could
be achieved because of influencing the Yttria's microstructure. The
"ceramic steel" titled Zirconia is doped with Yttria forming an
ultra-fine ductile structure with sub-micron grain formation
leading to enormous bending strengths. Magnesia doped qualities are
less strong also showing a coarser microstructure.
Common applications of Zirconia ceramics include extrusion dies,
wire and pipe extension, guide and other wear rollers, pressure
valves, and bearing materials.
Ceramic Manufacturing Process
Raw Material >> Milling/Mixing >> Spray/Drying >>
Forming >> Green Machining >> Sintering >>
Grinding >> Special Process >> Inspection >>
Cleaning >> Final Product
Application of Zirconia Ceramics
1.Precision ball valve (balls and seats)
2.Pump seals, valves and impellors
3.High density grinding media
6.Fuel cell membranes
8.Radio frequency heating susceptors
Advantages of Industrial Ceramic Pieces Zirconia Ceramic Bushing :
2. Long Service Life.
3. Good Polished Surface.
4. Superior Mechanical Strength.
5. High Corrosion and Wear Resistance.
6. Good Insulation Performance Precision.
7. High Temperature and Pressure Resistance.
8. High Purity Zirconia and Alumina Ceramic Material.
They deliver 10 times longer working life than other refractory and
heat resistant materials.
|Properties||Units||95 Alumina||99 Alumina||Zirconia|
|Density||ɡ / cm3||3.65||3.92||5.95 - 6.0|
|Coefficient of Thermal Expansion||10-6 / K||7.9||8.5||10.5|
|Modulus of Elasticity Young’s Mod||Gpa||280||340||210|
|HV Hardness||Mpa||1400||1650||1300 - 1365|
|Flexural Strength @ Room Temperature||Mpa||280||310||950|
|Flexural Strength @ 700℃||Mpa||220||230||210|
|Compressive Strength@Room Temperature||Mpa||2000||2200||2000|
|Fracture Toughness||Mpa * m½||3.8||4.2||10|
|Heat Conductivity @ Room Temperature||W / m * k||18 - 25||26 - 30||2.0 - 2.2|
|Electrical Resistivity @ Room Temperature||Ω*mm2 / m||＞1015||＞1016||＞1015|
|Max Application Temperature||℃||1500||1750||1050|
|Resistance to Acid Alkaline||/||High||High||High|
|Dielectric Strength||KV / mm||16||22||/|
|Thermal Shock Resistance||Δ T ( ℃ )||220||180 - 200||282 - 350|
|Tensile Strength @ 25℃||Mpa||200||248||252|
Product Photos Show
View More Products
Packaging and Shipping
Zirconia Ceramic Solenoid Spacer will be packed in a bubble bag
individually, then separated by a foam, finally put in standard
export carton packing, or OEM packing.
Shipped by Air ( DHL, TNT, UPS, Fedex, EMS ), or Sea
Who Are We?
Mingrui has professional OEM experience in manufacturing industrial ceramic parts for so many
years. We can make the products according to your drawings, custom the size,
thickness and other parameters.
What Do We Do?
We have very advanced technologies in the production of zirconia and alumina ceramic nozzle, rod, ring, tube, shaft, plate,
sleeve, valve, plunger, bearing, and semiconductive ceramics etc.. They are applicable to Electrical, Appliance, Oil & Gas, Energy
& Power, Food & Medical, Agriculture, Aerospace,
even other high-end fields.
Our products with some certificates, such as SGS, CE, TUV, etc..
Production Process Show
One-stop production, from the raw material powder to final product,
control every production link well.
1. Sintering Technology.
2. Molding Technology.
3. Grinding Technology.
4. Laser Carving Technology.
5. Laser Drilling Technology.
6. Polishing Technology.
7. Laser Marking Technology.
We have a advanced technical team with more than 80 people and more
than 100 equipment machines.
1. Pre-sale------Be Your Solution Expert.
2. Sale------Be Your Designer and Producer.
3. After-sale-----Be Your Technical Adviser .
Q1: How we get an offer?
A1: You can send us your drawings with technology requirments, and
inform your order quantity. If you can, please inform what is your
part used to. We will confirm the most suitable material and quote
our best price to you in 24 hours.
Q2: Can you provide the free samples?
A2: Yes, we can provide the free samples if we have stocks as same or
similar, but the freight charges be collected.